TextileGlossary.com

What is "Pocket hole" - Definition & Explanation

A hole, drilled into wood at an angle to hold a screw that will then join and reinforce joints. Pocket holes often have a special jig to make them. But you can make them by careful drilling or even a sharp chisel carving out a tetrahedral chip. Very useful for corner blocks or to reinforce frame joints that are not convenient or possible to take apart.

Some other terms

Some more terms:

Undergarments, also called underwear or sometimes intimate clothing, are clothes worn next to the skin, usually under other clothes. Wearing and changing underwear permits outer garments to be worn...
Refers to a coating that repels water but allows water vapor (thus perspiration) to pass through, allowing garments to be comfortable and waterproof. Used in garments for active wear and winter...
Fasteners with two layers: a "hook" side, which is a piece of fabric covered with tiny plastic hooks, and a "loop" side, which is covered with even smaller and "hairier" plastic loops.. When the two...
A woven construction in which patterns are built in at spaced intervals through the use of extra warp and/or extra fill yarns are placed in selected areas. These yarns are woven into the fabric by...
A manufactured assembly of fibres or yarns (or both) that has substantial surface area in relation to its thickness, and sufficient mechanical strength to give the assembly inherent...

Companies for Pocket hole:


If you manufacture, distribute or otherwise deal in Pocket hole, please fill your company details below so that we can list our company for FREE!